RM1840EF
_51
Engine / Hybrid System
_009568
2KD-FTV ENGINE CONTROL
_0052056
CAMSHAFT POSITION SENSOR
A
2KD-FTV ENGINE CONTROL CAMSHAFT POSITION SENSOR INSTALLATION
PROCEDURE
1.INSTALL CAMSHAFT POSITION SENSOR
a.
Apply a light coat of engine oil to the O-ring of the camshaft position sensor.
b.
Install the camshaft position sensor with the bolt.
- Torque:
- 8.5 N*m (87 kgf*cm, 75 in.*lbf)
c.
Connect the camshaft position sensor connector.