Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › CRANKSHAFT POSITION SENSOR › 2011.10–2012.10
RM1840EF _51 Engine / Hybrid System _009568 2KD-FTV ENGINE CONTROL _0052057 CRANKSHAFT POSITION SENSOR A

2KD-FTV ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 2.REMOVE NO. 2 ENGINE UNDER COVER

Hide 3.REMOVE CRANKSHAFT POSITION SENSOR

a.

Disconnect the crankshaft position sensor connector.


b.

Remove the 4 clips, bolt and crankshaft position sensor.

A253484