Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR › from 2012.10
RM1840EF _51 Engine / Hybrid System _009568 2KD-FTV ENGINE CONTROL _0052058 ENGINE COOLANT TEMPERATURE SENSOR A

2KD-FTV ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE NO. 1 ENGINE UNDER COVER (for 4WD and Pre-Runner)

Hide 3.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A252686

Disconnect the engine coolant temperature sensor connector.


b.

Remove the engine coolant temperature sensor.


c.

Remove the gasket from the engine coolant temperature sensor.