Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › ACCELERATOR PEDAL
RM1840EF _51 Engine / Hybrid System _009568 2KD-FTV ENGINE CONTROL _0052061 ACCELERATOR PEDAL A

2KD-FTV ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid excessive force to the accelerator pedal sensor.

·

Do not disassemble the accelerator pedal sensor assembly.

·

This accelerator pedal does not require lubrication.

Do not apply oil or lubricant to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.



a.
A301309

Disconnect the accelerator pedal position sensor connector.


b.

Remove the 2 bolts and accelerator pedal sensor.