Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o DPF)
RM1840EF _51 Engine / Hybrid System _009568 2KD-FTV ENGINE CONTROL _0052064 MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o DPF) A

2KD-FTV ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o DPF)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

a.

w/o EGR Cooler:

i.

Install the manifold absolute pressure sensor with the 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


ii.

Connect the manifold absolute pressure sensor connector and vacuum hose.



b.

w/ EGR Cooler:

i.

Install the manifold absolute pressure sensor with the 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


ii.

Connect the vacuum hose and attach the 2 clamps.


iii.

Connect the manifold absolute pressure sensor connector.