Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o DPF)
RM1840EF _51 Engine / Hybrid System _009568 2KD-FTV ENGINE CONTROL _0052064 MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o DPF) A

2KD-FTV ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o DPF)  REMOVAL  


PROCEDURE

Hide 1.REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

a.

w/ EGR Cooler:

i.
A211889

Disconnect the manifold absolute pressure sensor connector.


ii.

Disconnect the vacuum hose and detach the 2 clamps.


iii.

Remove the 2 bolts and manifold absolute pressure sensor.



b.

w/o EGR Cooler:

i.
A252007

Disconnect the manifold absolute pressure sensor connector and vacuum hose.


ii.

Remove the 2 bolts and manifold absolute pressure sensor.