1.REMOVE INTERCOOLER ASSEMBLY (w/ Intercooler)
2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ No. 1 Engine Cover)
| *1 | Engine Cover |
| *2 | Claw |
| *3 | Pin |
Detach the 4 claws from the pins of the cover bracket and remove the No. 1 engine cover.
3.REMOVE ENGINE COVER BRACKET (w/ No. 1 Engine Cover)
Remove the 2 bolts and engine cover bracket.
4.REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY (w/o Intercooler)
Disconnect the manifold absolute pressure sensor connector.
Disconnect the vacuum hose from the gas filter.
Loosen the 2 clamps.
Remove the bolt and disconnect the No. 2 air cleaner pipe together with the 2 air hoses.
5.REMOVE DIESEL THROTTLE BODY ASSEMBLY
Disconnect the 2 connectors.
Remove the 2 bolts, 2 nuts, diesel throttle body and gasket.