Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › ECD SYSTEM(w/ EGR Cooler)
RM1840EF _51 Engine / Hybrid System _009568 2KD-FTV ENGINE CONTROL _0052067 ECD SYSTEM(w/ EGR Cooler) D

2KD-FTV ENGINE CONTROL  ECD SYSTEM(w/ EGR Cooler)  SYSTEM DESCRIPTION  


ENGINE CONTROL SYSTEM


A262592
1.031,1.927 1.177,1.927 1.177,1.927 1.385,1.719 false 5.802,0.271 5.677,0.271 5.677,0.271 5.615,0.375 false 5.635,1.26 5.51,1.26 5.51,1.26 5.427,1.354 false 5.583,1.698 5.49,1.698 5.49,1.698 5.406,1.594 false 5.469,1.906 5.323,1.906 5.323,1.906 5.229,1.615 false 4.573,1.781 4.458,1.781 4.458,1.781 4.313,1.938 false 4.708,2.479 4.792,2.479 4.792,2.479 4.823,2.594 false 5.885,2.479 5.781,2.479 5.781,2.479 5.729,2.594 false 4.719,2.969 4.781,2.969 4.781,2.969 4.885,2.781 false 3.188,4.875 3.323,4.875 3.323,4.875 3.458,4.719 false 5.76,4.51 5.667,4.51 5.667,4.51 5.573,4.656 false 6.042,4.74 5.938,4.74 5.938,4.74 5.844,4.833 false 6.302,5.01 6.219,5.01 6.219,5.01 6.156,5.063 false 4.354,5.146 4.417,5.146 4.417,5.146 4.5,5.281 false 4.354,5.417 4.458,5.417 4.458,5.417 4.552,5.563 false 5.302,5.031 5.302,4.938 false 4.885,5.854 4.948,5.854 4.948,5.854 4.99,5.927 false 4.531,6.677 4.531,6.573 4.531,6.573 4.667,6.375 false 5.583,6.417 5.542,6.417 5.542,6.417 5.521,6.396 false 6.302,6.427 6.271,6.427 false 4.229,7.448 4.292,7.448 4.292,7.448 4.385,7.323 false 4.292,7.688 4.375,7.688 4.375,7.688 4.677,7.792 true 5.448,7.052 5.448,6.938 5.448,6.938 5.521,6.823 false 6.302,6.698 6.26,6.698 6.26,6.698 6.167,6.594 true 6.344,7.406 6.344,7.365 6.344,7.365 6.385,7.313 false 6.573,7.74 6.573,7.625 6.573,7.625 6.667,7.469 false 5.844,5.885 5.802,5.885 5.802,5.885 5.115,6.281 true 3.458,4.615 3.219,4.51 3.219,4.51 3.104,4.51 true 3.448,6.219 3.323,6.344 3.323,6.344 3.219,6.344 false 2.083,2.313 2.375,2.625 0.292,0.313 10 false *1 0.865,1.844 1.083,2.063 0.219,0.219 10 false *3 0.865,2.177 1.083,2.365 0.219,0.188 10 false *4 0.865,3.875 1.104,4.083 0.24,0.208 10 false *7 0.865,2.854 1.083,3.073 0.219,0.219 10 false *5 0.865,3.177 1.094,3.385 0.229,0.208 10 false *6 2.083,2.667 2.427,2.927 0.344,0.26 10 false *2 0.865,4.5 1.104,4.729 0.24,0.229 10 false *9 0.865,4.156 1.115,4.365 0.25,0.208 10 false *8 4.063,7.615 4.385,7.865 0.323,0.25 10 false *38 6.458,7.74 6.771,7.958 0.313,0.219 10 false *37 3.979,7.375 4.25,7.594 0.271,0.219 10 false *36 6.26,7.406 6.542,7.615 0.281,0.208 10 false *35 5.344,7.052 5.625,7.25 0.281,0.198 10 false *34 6.313,6.625 6.604,6.854 0.292,0.229 10 false *33 6.292,6.344 6.583,6.542 0.292,0.198 10 false *32 4.438,6.677 4.729,6.917 0.292,0.24 10 false *31 5.583,6.333 5.875,6.542 0.292,0.208 10 false *30 2.979,6.26 3.271,6.479 0.292,0.219 10 false *29 4.667,5.781 4.969,6.021 0.302,0.24 10 false *28 4.125,5.354 4.406,5.573 0.281,0.219 10 false *27 4.125,5.073 4.385,5.271 0.26,0.198 10 false *26 6.323,4.938 6.615,5.188 0.292,0.25 10 false *25 2.865,4.427 3.188,4.667 0.323,0.24 10 false *23 5.188,5.031 5.49,5.26 0.302,0.229 10 false *22 6.073,4.667 6.333,4.896 0.26,0.229 10 false *21 5.802,4.417 6.063,4.635 0.26,0.219 10 false *20 0.781,4.833 1.104,5.063 0.323,0.229 10 false *10 4.25,3.354 4.563,3.615 0.313,0.26 10 false *19 4.469,2.906 4.76,3.167 0.292,0.26 10 false *18 5.917,2.406 6.24,2.667 0.323,0.26 10 false *17 4.49,2.406 4.76,2.635 0.271,0.229 10 false *16 4.604,1.729 4.917,1.979 0.313,0.25 10 false *15 5.49,1.833 5.833,2.073 0.344,0.24 10 false *14 5.615,1.625 5.927,1.865 0.313,0.24 10 false *13 5.667,1.198 5.99,1.438 0.323,0.24 10 false *12 5.833,0.219 6.125,0.427 0.292,0.208 10 false *11 5.875,5.813 6.156,6.052 0.281,0.24 10 false *39 2.958,4.802 3.25,5.021 0.292,0.219 10 false *24
*1 ECM *2 Atmospheric Pressure Sensor
*3 Accelerator Pedal Position Sensor *4 Ignition Switch Signal
*5 Starter Signal *6 Vehicle Speed Signal
*7 DLC3 *8 Battery Voltage
*9 Other Signal *10 Stop Light Switch
*11 Fuel Tank *12 Suction Control Valve
*13 Fuel Temperature Sensor *14 Fuel Supply Pump Assembly
*15 Generator *16 Fuel Pressure Sensor
*17 Pressure Discharge Valve *18 Common Rail Assembly
*19 Injector Driver *20 Intake Air Temperature Sensor
*21 Diesel Throttle Body Assembly *22 Intercooler
*23 Mass Air Flow Meter *24 Intake Air Temperature Sensor (Built Into Mass Air Flow Meter)
*25 Manifold Absolute Pressure Sensor *26 Vacuum Switching Valve (for EGR Bypass Valve)
*27 EGR Cooler *28 Injector Assembly
*29 Turbocharger Sub-assembly *30 EGR Valve Position Sensor
*31 Engine Coolant Temperature Sensor *32 Electric Vacuum Regulating Valve Assembly
*33 Vacuum Switching Valve (for EGR Cut) *34 Vacuum Switching Valve (for Swirl Control Valve)
*35 Vacuum Pump *36 Camshaft Position Sensor
*37 Glow Plug Relay (GLOW) *38 Crankshaft Position Sensor
*39 Glow Plug - -



COMMON RAIL SYSTEM DESCRIPTION


COMMON RAIL SYSTEM:

The common rail system uses high-pressure fuel to improve fuel economy and to provide robust engine power, while suppressing engine vibration and noise.

This system stores fuel, which has been pressurized and supplied by the supply pump, in the common rail. By storing fuel at high-pressure, the common rail system can provide fuel at stable fuel injection pressures, regardless of engine speed or engine load.

The ECM regulates the fuel injection timing and volume by using the EDU to provide an electric current to the solenoid valve in the injector. The ECM also monitors the internal fuel pressure of the common rail using the fuel pressure sensor. The ECM causes the supply pump to supply the fuel necessary to obtain the target fuel pressure.

In addition, this system has a 2-Way Valve (TWV) inside the injector to open and close the fuel passage. As a result, both fuel injection timing and fuel injection volume can be precisely regulated by the ECM.

The common rail system provides two split fuel injections. In order to soften combustion shock, this system performs "pilot-injection" as the subsidiary fuel injection prior to the main fuel injection. This helps to reduce engine vibration and noise.

A154086
1.75,1.323 1.729,0.927 1.729,0.927 1.583,0.927 false 1.75,2.198 2.063,1.833 2.063,1.833 1.865,1.833 false 0.958,2.625 0.865,3.01 false 2.24,1.302 2.354,1.073 2.354,1.073 2.458,1.073 false 5.01,1.302 4.552,0.76 4.552,0.76 4.333,0.76 false 4.854,4.854 5.292,5.135 0.438,0.281 10 false ECM 6.25,4.844 6.76,5.115 0.51,0.271 10 false Sensor 0.063,0.031 3.24,0.365 3.177,0.333 10 false Common Rail System Diagram (Fuel System) 0.198,0.823 1.615,1.104 1.417,0.281 10 false Fuel Pressure Sensor 2.479,0.99 3.458,1.292 0.979,0.302 10 false Common Rail 2.708,0.646 4.323,0.958 1.615,0.313 10 false Pressure Discharge Valve 4.656,0.469 6.042,0.781 1.385,0.313 10 false : High-pressure Area 0.26,1.75 1.833,2.021 1.573,0.271 10 false Fuel Temperature Sensor 0.188,3.042 1.083,3.323 0.896,0.281 10 false Supply Pump 1.542,4.26 2.219,4.552 0.677,0.292 10 false Fuel Filter 1.229,4.698 1.958,4.979 0.729,0.281 10 false Fuel Tank 3.625,4.542 4.073,4.865 0.448,0.323 10 false EDU 5.583,3.365 6.208,3.708 0.625,0.344 10 false Injector

COMMON RAIL SYSTEM COMPONENTS:
Component Description
Common rail Stores high-pressure fuel produced by supply pump
Supply pump Operated by crankshaft. Supplies high-pressure fuel to common rail.
Injector Injects fuel to combustion chamber based on signals from ECM
Fuel pressure sensor Monitors internal fuel pressure of common rail and sends signals to ECM
Pressure discharge valve Based on signals from the ECM, opens valve when sudden deceleration is occurred, or when the ignition switch is OFF to prevent the fuel pressure from becoming too high.
Suction control valve Based on signals from ECM, adjusts fuel volume supplied to common rail and regulates internal fuel pressure


DIAGNOSTIC TROUBLE CODE (DTC) TABLE FOR COMMON RAIL SYSTEM:
HINT:

This table indicates typical DTC combinations for each malfunction occurrence.


Trouble Area Malfunction DTC No.
Injector Open or short in injector circuit P0200, P0093*
Stuck open P0093
Stuck closed -
Fuel pressure sensor Open or short in fuel pressure sensor circuit or pressure sensor output fixed P0087, P0190, P0191, P0192, P0193
Pressure discharge valve Open or short in pressure discharge valve circuit P1271, P1272, P0088*, P0093*, P1229*
Stuck open P0093
Stuck closed P1272, P0088*
Suction control valve Open or short in suction control valve circuit P0627, P1229, P0088*
Stuck open P1229, P0088*
Stuck closed -
EDU Faulty EDU P0093*, P0200*, P1271*, P1272*
Common rail system (Fuel system) Fuel leaks in high-pressure areas P0093

HINT:

*: There may be no DTC output depending on the condition of the malfunction.



DIAGNOSTIC TROUBLE CODE DESCRIPTION FOR COMMON RAIL SYSTEM:
DTC No. Description
P0087 Fuel pressure sensor output does not change
P0088 Internal fuel pressure too high (200000 kPa [2039 kgf/cm2, 29007 psi] or more)
P0093 Fuel leaks in high-pressure areas
P0190 Open or short in fuel pressure sensor circuit (Low or high output)
P0191 Fuel pressure sensor out of range (Low output)
P0192 Open or short in fuel pressure sensor circuit (High output)
P0193 Open or short in fuel pressure sensor circuit (Sensor 1 and/or 2 relation)
P0200 Open or short in EDU or injector circuit
P0627 Open or short in suction control valve circuit
P1229 Fuel over-feed
P1271 Open or short in pressure discharge valve circuit
P1272 Closed malfunction of the pressure discharge valve


INJECTION CONTROL SYSTEM DESCRIPTION


The ECM controls the fuel injection system by using the injectors and supply pump. The ECM regulates the fuel injection volume and fuel injection timing by controlling both the duration and timing of energizing to the solenoid valve in the injector. The ECM regulates injection pressure by controlling the suction control valve located in the supply pump.

The feed pump is used to pump fuel from the fuel tank to the supply pump.


A148213
5.948,5.125 6.146,5.125 false 5.927,3.708 6.281,3.979 true 5.938,3.229 6.302,3.229 true 6,2.75 6.396,2.677 true 5.906,2.292 6.385,1.792 true 5.646,2.958 5.208,2.646 true 3.854,4.135 3.688,3.354 3.688,3.354 3.583,3.354 true 2.76,4.469 2.677,3.396 2.677,3.396 2.625,3.396 false 2.302,4.75 2.479,5.219 true 3.75,4.656 2.75,5.875 true 4.375,5.563 4.448,5.896 false 3.594,2.219 3.542,1.792 3.542,1.792 3.469,1.792 false 5.938,1.958 6.208,1.24 6.208,1.24 6.302,1.24 false 0.104,1.115 1.229,1.583 1.125,0.469 10 false Accelerator Pedal Position Sensor 0.115,0.01 1.948,0.26 1.833,0.25 10 false Injection Control Diagram 5.677,5.49 6.271,5.688 0.594,0.198 10 false Injector 6.198,4.99 6.646,5.448 0.448,0.458 10 false Nozzle Needle 6.344,3.938 6.833,4.135 0.49,0.198 10 false Piston 6.354,3.156 6.948,3.521 0.594,0.365 9 false Control Chamber 6.458,2.573 6.917,2.771 0.458,0.198 10 false Orifice 4.771,2.521 5.281,2.75 0.51,0.229 10 false Orifice 6.427,1.719 6.854,1.917 0.427,0.198 10 false TWV 6.396,1.073 6.958,1.5 0.563,0.427 10 false Solenoid Valve 3.74,1.469 4.125,1.667 0.385,0.198 10 false EDU 3.281,2.479 4.198,2.708 0.917,0.229 10 false Common Rail 2.115,1.688 3.51,1.969 1.396,0.281 10 false Fuel Pressure Sensor 4.167,5.917 5.073,6.125 0.906,0.208 10 false Check Valve 3.063,3.24 3.615,3.448 0.552,0.208 10 false Plunger 2.24,5.875 3.292,6.167 1.052,0.292 10 false Eccentric Cam 2.292,5.229 3.052,5.448 0.76,0.219 10 false Feed Pump 2.135,3.115 2.615,3.708 0.479,0.594 10 false Suction Control Valve 0.125,4.271 1.135,4.531 1.01,0.26 10 false Other Sensors 0.854,5.813 1.604,6.01 0.75,0.198 10 false Fuel Tank 0.104,3.5 1.323,3.969 1.219,0.469 10 false Crankshaft Position Sensor (NE Signal) 0.104,2.292 1.24,2.74 1.135,0.448 10 false Camshaft Position Sensor 1.563,2.479 1.927,2.667 0.365,0.188 10 false ECM

SUPPLY PUMP OPERATION SYSTEM DESCRIPTION


The rotation of the eccentric cam in the supply pump causes the ring cam in the supply pump to push plunger A upward as illustrated below. The spring force pulls plunger B (located opposite to plunger A) upward. As a result, plunger B draws the fuel in and plunger A pumps fuel out at the same time.

A148214
0.469,2.115 0.469,1.146 0.469,1.146 0.583,1.146 false 1.531,1.021 2.354,0.5 2.354,0.5 2.521,0.5 false 2.354,0.5 2.198,1.021 false 1.865,1.438 3.031,0.854 true 1.958,1.917 3.021,1.406 true 2.073,2.208 2.958,2.719 true 1.917,2.563 2.948,3.156 true 0.979,2.854 0.979,3.448 0.979,3.448 0.833,3.448 false 0.063,0.073 2.104,0.406 2.042,0.333 10 false Supply Pump Operation Diagram 0.625,1.01 1.125,1.604 0.5,0.594 10 false Suction Control Valve 2.615,0.438 3.406,0.708 0.792,0.271 10 false Check Valve 3.083,0.771 3.771,1.052 0.688,0.281 10 false Plunger A 3.073,1.323 4.115,1.563 1.042,0.24 10 false Eccentric Cam 2.896,1.729 4.583,1.99 1.688,0.26 10 false to Common Rail Assembly 3.01,2.708 3.75,2.958 0.74,0.25 10 false Ring Cam 3,3.146 3.708,3.406 0.708,0.26 10 false Plunger B 1.104,3.188 2.865,3.396 1.76,0.208 10 false Plunger A: Pumping End 1.104,3.448 2.823,3.865 1.719,0.417 10 false Plunger B: Suction End 0.167,3.271 0.813,3.698 0.646,0.427 10 false from Feed Pump 4.958,3.188 6.74,3.438 1.781,0.25 10 false Plunger A: Suction Start 4.958,3.448 6.781,3.729 1.823,0.281 10 false Plunger B: Pumping Start 4.958,6.75 6.615,7 1.656,0.25 10 false Plunger A: Suction End 4.958,7.063 6.656,7.375 1.698,0.313 10 false Plunger B: Pumping End 1.052,6.75 3.021,7.021 1.969,0.271 10 false Plunger A: Pumping Start 1.052,7.063 3.042,7.354 1.99,0.292 10 false Plunger B: Suction Start


SUCTION CONTROL VALVE OPERATION SYSTEM DESCRIPTION


HINT:

The ECM controls the suction control valve operation to regulate the fuel volume that is pumped by the supply pump to the common rail. This control is performed to adjust the internal fuel pressure of the common rail to the targeted injection pressure.


a.

Small opening of the suction control valve:

i.

When the opening of the suction control valve is small, the fuel suction path is kept narrow. Therefore the transferable fuel volume is reduced (*A).


ii.

The suction volume becomes small due to the narrow path despite the plunger stroke being full. The difference between the geometrical volume and suction volume creates a vacuum (*B).


iii.

Pumping will start when the fuel pressure becomes higher than the common rail pressure (*C).

A148215
1.438,2.677 1.25,3.031 false 1.396,2.479 1.094,2.177 false 1.844,2.542 2.24,2.219 2.24,2.219 2.385,2.219 false 2.49,2.542 2.25,2.219 false 3.563,1.094 3.938,0.51 3.938,0.51 3.667,0.51 false 4.552,1.083 4.75,0.792 4.75,0.792 4.938,0.792 false 1.99,1.063 1.99,0.781 1.99,0.781 1.781,0.781 false 0.073,0.031 3.542,0.281 3.469,0.25 10 false Suction Control Valve Operation at Small Opening 0.146,0.677 1.75,0.875 1.604,0.198 10 false Plunger Top-dead Center 1.885,0.406 3.74,0.615 1.854,0.208 10 false Plunger Bottom-dead Center 5.031,0.688 6.5,0.938 1.469,0.25 10 false Pumping Starting Point 4.458,1.917 4.781,2.135 0.323,0.219 10 false (*C) 3.469,1.917 3.75,2.115 0.281,0.198 10 false (*B) 1.885,1.917 2.188,2.115 0.302,0.198 10 false (*A) 2.417,2.115 3.281,2.313 0.865,0.198 10 false Check Valve 0.573,1.385 1.375,1.594 0.802,0.208 10 false Cam Stroke 0.073,2.063 1.063,2.479 0.99,0.417 10 false Suction Control Valve 0.573,3.042 1.583,3.302 1.01,0.26 10 false Small Opening 5.573,0.167 7.083,0.375 1.51,0.208 10 false : Fuel Pumping Volume 5.24,3.479 5.635,3.802 0.396,0.323 10 false (*C) 3.688,3.521 4.125,3.792 0.438,0.271 10 false (*B) 1.99,3.479 2.354,3.719 0.365,0.24 10 false (*A)



b.

Large opening of the suction control valve:

i.

When the opening of the suction control valve is large, the fuel suction path is kept wide. Therefore the transferable fuel volume is increased (*D).


ii.

If the plunger stroke is full, the suction volume becomes large because of the wide path (*E).


iii.

Pumping will start when the fuel pressure becomes higher than the common rail pressure (*F).

A148216
1.427,2.51 1.177,2.198 false 1.448,2.656 1.198,3.042 false 3.563,1.083 3.323,0.76 false 0.104,0.125 3.615,0.375 3.51,0.25 10 false Suction Control Valve Operation at Large Opening 1.833,0.656 3.333,0.875 1.5,0.219 10 false Pumping Starting Point 5.604,0.146 7.146,0.458 1.542,0.313 10 false : Fuel Pumping Volume 0.729,1.354 1.5,1.573 0.771,0.219 10 false Cam Stroke 0.198,2.115 1.156,2.594 0.958,0.479 10 false Suction Control Valve 0.26,2.948 1.229,3.333 0.969,0.385 10 false Large Opening 1.875,1.927 2.208,2.125 0.333,0.198 10 false (*D) 3.458,1.938 3.771,2.146 0.313,0.208 10 false (*E) 3.76,1.948 4.063,2.167 0.302,0.219 10 false (*F) 2.042,3.5 2.375,3.698 0.333,0.198 10 false (*D) 4.01,3.552 4.323,3.76 0.313,0.208 10 false (*E) 5.719,3.542 6.021,3.76 0.302,0.219 10 false (*F)