Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › AIR FUEL RATIO SENSOR(w/ DPF) › from 2012.04
RM1840EF _51 Engine / Hybrid System _009568 2KD-FTV ENGINE CONTROL _0052073 AIR FUEL RATIO SENSOR(w/ DPF) G

2KD-FTV ENGINE CONTROL  AIR FUEL RATIO SENSOR(w/ DPF)  INSPECTION  


PROCEDURE

Hide 1.INSPECT AIR FUEL RATIO SENSOR

a.
A253516
0.802,1.563 0.927,1.563 0.927,1.563 1.396,1.25 false 0.802,0.594 0.927,0.594 0.927,0.594 1.396,0.896 false 2.646,0.594 2.521,0.594 2.521,0.594 2.052,0.896 false 0.552,0.51 0.865,0.698 0.313,0.188 10 false +B 2.75,0.5 3.177,0.646 0.427,0.146 10 false HAF2 0.417,1.479 0.781,1.635 0.365,0.156 10 false AF2- 0.135,0.135 0.417,0.313 0.281,0.177 10 false *a
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HAF2) - 2 (+B) 20°C (68°F) 1.8 to 3.4 Ω
1 (HAF2) - 4 (AF2-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.