Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › AIR FUEL RATIO SENSOR(w/ Secondary Air Injection System)
RM1840EF _51 Engine / Hybrid System _009569 2TR-FE ENGINE CONTROL _0052074 AIR FUEL RATIO SENSOR(w/ Secondary Air Injection System) G

2TR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR(w/ Secondary Air Injection System)  INSPECTION  


PROCEDURE

Hide 1.INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

a.

Check the resistance.

i.
A112089
2.042,1.063 2.698,1.063 true 0.76,1.063 1.406,1.063 true 0.75,1.75 0.969,1.75 0.969,1.75 1.375,1.594 true 0.479,0.958 0.698,1.115 0.219,0.156 10 false +B 2.771,0.958 3.198,1.115 0.427,0.156 10 false HA1A 0.323,1.656 0.677,1.813 0.354,0.156 10 false A1A- 0.125,0.052 0.302,0.208 0.177,0.156 10 false *a
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.8 to 3.4 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.