Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › AIR FUEL RATIO SENSOR(w/ Secondary Air Injection System)
RM1840EF _51 Engine / Hybrid System _009569 2TR-FE ENGINE CONTROL _0052074 AIR FUEL RATIO SENSOR(w/ Secondary Air Injection System) A

2TR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR(w/ Secondary Air Injection System)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves when removing the air fuel ratio sensor.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



PROCEDURE

Hide 1.REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

a.
A253272

Disconnect the air fuel ratio sensor connector.


b.

Detach the 3 wire harness clamps.


c.
A112092
2.625,1.531 2.917,1.635 2.917,1.635 3,1.635 false 3.031,1.542 3.365,1.729 0.333,0.188 10 SST

Using SST, remove the air fuel ratio sensor.

SST
09224-00010