Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › HEATED OXYGEN SENSOR(w/ Secondary Air Injection System)
RM1840EF _51 Engine / Hybrid System _009569 2TR-FE ENGINE CONTROL _0052075 HEATED OXYGEN SENSOR(w/ Secondary Air Injection System) A

2TR-FE ENGINE CONTROL  HEATED OXYGEN SENSOR(w/ Secondary Air Injection System)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves when removing the heated oxygen sensor.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



PROCEDURE

Hide 1.REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

a.
A112094

Disconnect the heated oxygen sensor connector.


b.

Detach the sensor wire from the clamp.


c.
A112120
1.948,1.979 1.865,1.979 1.865,1.979 1.292,1.49 false 2,1.896 2.375,2.125 0.375,0.229 10 SST

Using SST, remove the heated oxygen sensor.

SST
09224-00010