Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › SFI SYSTEM(w/ Secondary Air Injection System) › from 2012.10
RM1840EF _51 Engine / Hybrid System _009569 2TR-FE ENGINE CONTROL _0052076 SFI SYSTEM(w/ Secondary Air Injection System) M

2TR-FE ENGINE CONTROL  SFI SYSTEM(w/ Secondary Air Injection System)  REGISTRATION  


CAUTION / NOTICE / HINT

NOTICE:

The Vehicle Identification Number (VIN) must be input into a replacement ECM.


HINT:

The VIN is a 17-digit alphanumeric vehicle identification number. The intelligent tester is required to register the VIN.


PROCEDURE

Hide 1. DESCRIPTION

HINT:

This registration section consists of two parts: Read VIN and Write VIN.


a.

Read VIN: This process allows the VIN stored in the ECM to be read in order to confirm that the two VINs, the one provided with the vehicle and the one stored in the vehicle's ECM, are the same.


b.

Write VIN: This process allows the VIN to be input into the ECM. If the ECM is changed, or the ECM VIN and vehicle VIN do not match, the VIN can be registered or overwritten in the ECM by following this procedure.


Hide 2. READ VIN

a.

Confirm the vehicle VIN.


b.

Connect the intelligent tester to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the intelligent tester on.


e.

Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Read.

Powertrain > Engine > Utility
Tester Display
VIN
50005 61 196

Hide 3. WRITE VIN

a.

Confirm the vehicle VIN.


b.

Connect the intelligent tester to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the intelligent tester on.


e.

Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Write.

Powertrain > Engine > Utility
Tester Display
VIN
50005 61 196