Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM1840EF _51 Engine / Hybrid System _009569 2TR-FE ENGINE CONTROL _0052078 CAMSHAFT OIL CONTROL VALVE A

2TR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.
A301346
1.552,1.052 1.427,0.594 1.427,0.594 1.271,0.594 false 1.094,0.5 1.406,0.656 0.313,0.156 10 false *1
*1 New O-Ring


Apply a light coat of engine oil to a new O-ring and install the O-ring to the camshaft timing oil control valve.


b.

Install the camshaft timing oil control valve with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (surface which contacts the cylinder head).

·

Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.




c.

Connect the camshaft timing oil control valve connector.