Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM1840EF _51 Engine / Hybrid System _009569 2TR-FE ENGINE CONTROL _0052078 CAMSHAFT OIL CONTROL VALVE G

2TR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Start and warm up the engine.


e.

Idle the engine.


f.

Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1).

Powertrain > Engine > Active Test
Tester Display
Control the VVTL System (Bank1)
50004 61 77

g.

Operate the camshaft timing oil control valve using the intelligent tester, and then check the engine speed.

OK:
Tester Operation Specified Condition
Camshaft Timing Oil Control Valve OFF Normal engine speed
Camshaft Timing Oil Control Valve ON Engine idles roughly or stalls soon after camshaft timing oil control valve switched from OFF to ON


If the result is not as specified, check the camshaft timing oil control valve, wiring and ECM.