Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › THROTTLE BODY
RM1840EF _51 Engine / Hybrid System _009569 2TR-FE ENGINE CONTROL _0052079 THROTTLE BODY G

2TR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A223680
2.271,1.552 2.271,1.146 false 1.885,1.552 1.885,1.146 false 1.167,1.552 1.167,1.146 false 2.667,1.563 2.667,1.146 false 2.167,1.573 2.479,1.792 0.313,0.219 10 M+ 2.604,1.573 2.917,1.833 0.313,0.26 10 M- 0.104,0.125 0.406,0.385 0.302,0.26 10 *a 1.76,1.573 2.063,1.792 0.302,0.219 10 E2 1.042,1.573 1.365,1.813 0.323,0.24 10 VC
*a Component without harness connected
(Throttle Body with Motor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω
5 (VC) - 3 (E2) 20°C (68°F) 1.2 to 3.2 kΩ


If the result is not as specified, replace the throttle body with motor assembly.