Home › Engine / Hybrid System › 2TR-FE ENGINE CONTROL › HEATED OXYGEN SENSOR(w/o Secondary Air Injection System)
RM1840EF _51 Engine / Hybrid System _009569 2TR-FE ENGINE CONTROL _0052090 HEATED OXYGEN SENSOR(w/o Secondary Air Injection System) A

2TR-FE ENGINE CONTROL  HEATED OXYGEN SENSOR(w/o Secondary Air Injection System)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves when removing the heated oxygen sensor.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



PROCEDURE

Hide 1.REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 1)

a.
A253272

Disconnect the heated oxygen sensor connector.


b.

Detach the 3 wire harness clamps.


c.
A112092
2.99,1.635 2.854,1.635 2.854,1.635 2.656,1.51 false 3.021,1.542 3.385,1.75 0.365,0.208 10 SST

Using SST, remove the heated oxygen sensor.

SST
09224-00010