1.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
2.REMOVE 4WD CONTROL ECU (for 4WD)
3.REMOVE TURBO MOTOR DRIVER (w/o Glow Plug Controller)
4.REMOVE TRANSMISSION CONTROL ECU (for Automatic Transmission)
5.REMOVE ECM
w/ Glow Plug Controller:
Disconnect the 6 connectors.
w/o Glow Plug Controller:
Disconnect the 4 connectors.
Remove the bolt, 2 nuts and ECM.
6.REMOVE NO. 1 ECM BRACKET
w/ Glow Plug Controller:
Remove the 2 screws and No. 1 ECM bracket.
w/o Glow Plug Controller:
Remove the 3 screws and No. 1 ECM bracket.
7.REMOVE NO. 2 ECM BRACKET
| *A | w/ Glow Plug Controller |
| *B | w/o Glow Plug Controller |
Remove the 2 screws and No. 2 ECM bracket.