Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o Glow Plug Controller)
RM1840EF _51 Engine / Hybrid System _009570 1KD-FTV ENGINE CONTROL _0052101 MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o Glow Plug Controller) A

1KD-FTV ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o Glow Plug Controller)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

a.

w/o EGR Cooler:

i.

Install the manifold absolute pressure sensor with the bolt.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


ii.

Connect the vacuum hose and manifold absolute pressure sensor connector.


iii.

Install the gas filter with the bolt.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)



b.

w/ EGR Cooler:

i.

Install the manifold absolute pressure sensor with the 2 bolts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


ii.

Connect the vacuum hose and attach the 2 clamps.


iii.

Connect the manifold absolute pressure sensor connector.