Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o Glow Plug Controller)
RM1840EF _51 Engine / Hybrid System _009570 1KD-FTV ENGINE CONTROL _0052101 MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o Glow Plug Controller) A

1KD-FTV ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR(w/o Glow Plug Controller)  REMOVAL  


PROCEDURE

Hide 1.REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

a.

w/ EGR Cooler:

i.
A211889

Disconnect the manifold absolute pressure sensor connector.


ii.

Disconnect the vacuum hose and detach the 2 clamps.


iii.

Remove the 2 bolts and manifold absolute pressure sensor.



b.

w/o EGR Cooler:

i.
A110363

Remove the bolt and disconnect the gas filter.


ii.
A110364

Disconnect the manifold absolute pressure sensor connector and vacuum hose.


iii.

Remove the bolt and manifold absolute pressure sensor.