Home › Engine / Hybrid System › 1KD-FTV ENGINE CONTROL › ECD SYSTEM(for DPF) › from 2012.04
RM1840EF _51 Engine / Hybrid System _009570 1KD-FTV ENGINE CONTROL _0052104 ECD SYSTEM(for DPF) U

1KD-FTV ENGINE CONTROL  ECD SYSTEM(for DPF)  TERMINALS OF ECM  


E191646
0.677,0.698 1.135,0.927 0.458,0.229 1.677,0.698 2.135,0.927 0.458,0.229 3.167,0.698 3.625,0.927 0.458,0.229 4.104,0.698 4.563,0.927 0.458,0.229 4.969,0.698 5.427,0.927 0.458,0.229 6.083,0.698 6.542,0.927 0.458,0.229 0.719,0.74 1.177,0.938 0.458,0.198 10 false G149 1.729,0.75 2.198,0.938 0.469,0.188 10 false G148 3.229,0.74 3.656,0.938 0.427,0.198 10 false C113 4.167,0.74 4.573,0.938 0.406,0.198 10 false C114 5.031,0.74 5.49,0.938 0.458,0.198 10 false C111 6.146,0.74 6.604,0.958 0.458,0.219 10 false C112

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G149-23 (BATT) - C112-1 (E1) L - BR Battery (for measuring the battery voltage and for the ECM memory) Always 11 to 14 V
G148-24 (IGSW) - C112-1 (E1) B-O - BR Ignition switch Ignition switch ON 11 to 14 V
G149-24 (+B) - C112-1 (E1) B - BR Power source of ECM Ignition switch ON 11 to 14 V
G149-17 (+B2) - C112-1 (E1) B-R - BR Power source of ECM Ignition switch ON 11 to 14 V
G148-11 (MREL) - C112-1 (E1) W-G - BR MAIN relay Ignition switch ON 11 to 14 V
G148-11 (MREL) - C112-1 (E1) W-G - BR MAIN relay 10 seconds elapsed after ignition switch off 0 to 1.5 V
G148-6 (VCPA) - G148-5 (EPA) LG-R - BR-W Power source of accelerator pedal position sensor (for VPA) Ignition switch ON 4.5 to 5.5 V
G148-4 (VCP2) - G148-3 (EPA2) BR-R - BR-Y Power source of accelerator pedal position sensor (for VPA2) Ignition switch ON 4.5 to 5.5 V
G149-2 (VPA) - G148-5 (EPA) W-L - BR-W Accelerator pedal position sensor (for engine control) Ignition switch ON, accelerator pedal fully released 0.5 to 1.1 V
G149-2 (VPA) - G148-5 (EPA) W-L - BR-W Accelerator pedal position sensor (for engine control) Ignition switch ON, accelerator pedal fully depressed 3.0 to 4.6 V
G149-1 (VPA2) - G148-3 (EPA2) GR-G - BR-Y Accelerator pedal position sensor (for sensor malfunction detection) Ignition switch ON, accelerator pedal fully released 0.9 to 2.3 V
G149-1 (VPA2) - G148-3 (EPA2) GR-G - BR-Y Accelerator pedal position sensor (for sensor malfunction detection) Ignition switch ON, accelerator pedal fully depressed 3.4 to 5.0 V
C114-13 (VC) - C114-14 (E2) R-W - BR Power source for sensor (specific voltage) Engine switch on (IG) 4.5 to 5.0 V
C113-17 (VG) - C113-18 (EVG) W-R - B-W Mass air flow meter Idling Pulse generation
C113-6 (THA) - C114-14 (E2) Y-B - BR Intake air temperature sensor (built into mass air flow meter) Idling, intake air temperature at 20°C (68°F) 0.5 to 3.4 V
C113-3 (THIA) - C114-14 (E2) Y-G - BR Intake air temperature sensor Idling, intake air temperature at 0 to 80°C (32 to 176°F) 0.5 to 3.4 V
C113-5 (THW) - C114-14 (E2) R-L - BR Engine coolant temperature sensor Idling, engine coolant temperature at 80°C (176°F) 0.2 to 1.0 V
C113-4 (THF) - C114-14 (E2) G-B - BR Fuel temperature sensor Ignition switch ON 0.5 to 3.4 V
G149-6 (STA) - C112-1 (E1) L-Y - BR Starter signal Cranking 6.0 V or higher
C113-21 (#1) - C112-1 (E1)
C113-22 (#2) - C112-1 (E1)
C113-23 (#3) - C112-1 (E1)
C113-24 (#4) - C112-1 (E1)
B-W - BR
R - BR
V - BR
Y-R - BR
Injector assembly Idling Pulse generation
(See waveform 2)
C111-13 (G+) - C111-14 (G-) Y - L Camshaft position sensor Idling Pulse generation
(See waveform 5)
C111-7 (NE+) - C111-8 (NE-) Y - L Crankshaft position sensor Idling Pulse generation
(See waveform 5)
G149-8 (STP) - C112-1 (E1) G-W - BR Stop light switch assembly Ignition switch ON, brake pedal depressed 7.5 to 14 V
G149-8 (STP) - C112-1 (E1) G-W - BR Stop light switch assembly Ignition switch ON, brake pedal released 0 to 1.5 V
G149-9 (ST1-) - C112-1 (E1) R-L - BR Stop light switch assembly
(opposite to STP)
Ignition switch ON, brake pedal depressed 0 to 1.5 V
G149-9 (ST1-) - C112-1 (E1) R-L - BR Stop light switch assembly
(opposite to STP)
Ignition switch ON, brake pedal released 7.5 to 14 V
C114-15 (CLSW) - C112-1 (E1) G-W - BR Clutch switch assembly Ignition switch ON, clutch pedal released 8.5 to 14 V
G148-23 (TC) - C112-1 (E1) P-B - BR Terminal TC of DLC3 Ignition switch ON 11 to 14 V
G149-19 (W) - C112-1 (E1) R-B - BR MIL MIL illuminated 0 to 3 V
G149-19 (W) - C112-1 (E1) R-B - BR MIL MIL not illuminated 11 to 14 V
G148-30 (SPD) - C112-1 (E1) V-R - BR Speed signal from combination meter assembly Ignition switch ON, slowly wheel rotated Pulse generation
(See waveform 9)
C114-5 (PIM) - C114-14 (E2) L-B - BR Manifold absolute pressure sensor Negative pressure of 40 kPa (300 mmHg, 11.8 in.Hg) applied 0.1 to 0.7 V
C114-5 (PIM) - C114-14 (E2) L-B - BR Manifold absolute pressure sensor Same as atmospheric pressure 0.8 to 1.5 V
C114-5 (PIM) - C114-14 (E2) L-B - BR Manifold absolute pressure sensor Positive pressure of 170 kPa (1275 mmHg, 50.2 in.Hg) applied 1.6 to 2.3 V
G148-12 (IREL) - C112-1 (E1) B-W - BR EDU relay Ignition switch ON 0 to 1.5 V
G149-18 (TACH) - C112-1 (E1) B-W - BR Engine speed Idling Pulse generation
C113-13 (VCS) - C113-8 (E2S) L-W - P-L Power source of fuel pressure sensor (for PCR2) Ignition switch ON 4.5 to 5.5 V
C113-16 (PCR1) - C114-14 (E2) R-Y - BR Fuel pressure sensor (main) Idling 1.8 to 2.1 V
C113-2 (PCR2) - C113-8 (E2S) G-R - P-L Fuel pressure sensor (sub) Idling 1.2 to 1.5 V
C114-23 (ALT) - C112-1 (E1) G - BR Generator assembly (Alternator) duty ratio Idling Pulse generation
C114-7 (PEX) - C114-14 (E2) L - BR Differential pressure sensor Ignition switch ON 0.4 to 4.8 V
C111-6 (HAF2) - C112-11 (E05) Y - W-B Air fuel ratio sensor heater Ignition switch ON 11 to 14 V
C111-2 (AF2+) - C112-11 (E05) B - W-B Air fuel ratio sensor Ignition switch ON 2.0 to 2.5 V
C111-1 (AF2-) - C112-11 (E05) W - W-B Air fuel ratio sensor Ignition switch ON 2.0 to 2.5 V
C112-5 (FIV) - C112-1 (E1) W - BR Exhaust fuel addition injector Exhaust fuel addition injector operating Pulse generation
C111-23 (PCV+) - C111-12 (PCV-) G-W - G-Y Suction control valve Idling Pulse generation
(See waveform 1)
C113-20 (INJF) - C112-1 (E1) P - BR Injector driver Idling Pulse generation
(See waveform 3)
C113-19 (PRD) - C112-1 (E1) GR - BR Pressure discharge valve drive signal Engine warmed up, engine racing Pulse generation
(See waveform 4)
C111-4 (RLFF) - C112-1 (E1) GR - BR Pressure discharge valve confirmation signal Engine warmed up, engine racing Pulse generation
(See waveform 4)
C111-19 (IDLO) - C112-1 (E1) G - BR EDU Idling 4 to 5.5 V
C112-15 (M+) - C112-1 (E1) W - BR DC motor (turbocharger sub-assembly) Idling Pulse generation
(See waveform 6)
C112-14 (M-) - C112-1 (E1) B - BR DC motor (turbocharger sub-assembly) Idling Pulse generation
(See waveform 7)
C114-11 (VNVC) - C114-10 (VNE2) W - L Power source of nozzle vane position sensor Ignition switch ON 4.5 to 5.5 V
C114-6 (VNA) - C114-10 (VNE2) R - L Nozzle vane position sensor Ignition switch ON 2.3 to 2.7 V
C114-3 (VLU) - C114-14 (E2) B- BR Throttle position sensor Ignition switch ON, throttle valve
fully opened
3.6 to 4.2 V
C114-3 (VLU) - C114-14 (E2) B- BR Throttle position sensor Ignition switch ON, throttle valve
fully closed
0.4 to 1.0 V
C111-15 (LUSL) - C112-1 (E1) GR - BR Diesel throttle duty signal Engine warmed up, racing engine Pulse generation
(See waveform 8)
C113-1 (EGRA) - C114-14 (E2) R-Y - BR EGR valve position sensor Ignition switch ON 0.6 to 1.4 V
C112-6 (EGM+) - C112-8 (ME01) L - W-B EGR valve duty signal Engine warmed up, idling Pulse generation
C112-7 (EGM-) - C112-8 (ME01) Y - W-B EGR valve duty signal Engine warmed up, idling Pulse generation
C112-4 (ECBV) - C112-1 (E1) B-L - BR Vacuum switching valve (for EGR bypass valve) Vacuum switching valve assembly (for EGR bypass valve) on 0 to 1.5 V
Vacuum switching valve assembly (for EGR bypass valve) off 11 to 14 V
C111-17 (THCF) - C114-14 (E2) R - BR Exhaust gas temperature sensor Engine warmed up, idling 4.6 to 4.9 V
C111-5 (THCI) - C114-14 (E2) G-B - BR No. 2 Exhaust gas temperature sensor Engine warmed up, idling 4.6 to 4.9 V
C114-1 (THCO) - C114-14 (E2) B-Y - BR No. 3 Exhaust gas temperature sensor Engine warmed up, idling 4.6 to 4.9 V
C112-2 (SCV) - C112-12 (E01) LG - W-B Vacuum switching valve (for swirl control valve) Idling 0 to 1.5 V
Engine speed 2600 rpm or more 11 to 14 V
G148-10 (AC1) - C112-12 (E01) Y - W-B A/C signal A/C switch on 0 to 1.5 V
A/C switch off 11 to 14 V
G148-13 (ACT) - C112-12 (E01) R-L - W-B A/C signal Ignition switch ON 11 to 14 V
A/C cut control on 0 to 3 V
G148-36 (CANL) - C112-1 (E1) W - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 10)
G148-35 (CANH) - C112-1 (E1) B - BR CAN communication line Ignition switch ON Pulse generation
(See waveform 11)

WAVEFORM 1


A208446
2.65,0.215 3.288,0.379 0.638,0.163 10 10 V/DIV. 0.049,1.108 0.464,1.272 0.416,0.163 10 PCV+ 1.471,1.84 2.436,2.004 0.965,0.163 10 5 msec./DIV.

Suction Control Valve Signal
Item Content
Terminal No. (Symbol) C111-23 (PCV+) - C111-12 (PCV-)
Tool Setting 10 V/DIV., 5 msec./DIV.
Condition Idling or cranking with warm engine

HINT:

The waveform varies depending on suction control valve operation.



WAVEFORM 2


A208447
2.734,0.144 3.309,0.308 0.575,0.163 10 5 V/DIV. 0.173,0.406 0.574,0.569 0.401,0.163 10 (a) #1 0.173,0.79 0.574,0.953 0.401,0.163 10 (b) #3 0.173,1.177 0.574,1.34 0.401,0.163 10 (c) #4 0.173,1.572 0.574,1.735 0.401,0.163 10 (d) #2 1.496,1.844 2.461,2.007 0.964,0.163 10 20 msec./DIV.

Injector No. 1 (to No. 4) Injection Signal
Item Content
Terminal No. (Symbol) (a) C113-21 (#1) - C112-1 (E1)
(b) C113-22 (#2) - C112-1 (E1)
(c) C113-23 (#3) - C112-1 (E1)
(d) C113-24 (#4) - C112-1 (E1)
Tool Setting 5 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the injector injection.



WAVEFORM 3


A208448
2.689,0.248 3.264,0.412 0.575,0.163 10 2 V/DIV. 0.294,0.747 0.633,0.91 0.339,0.163 10 INJF 1.589,1.799 2.553,1.963 0.964,0.163 10 20 msec./DIV.

Injector Injection Confirmation Signal
Item Content
Terminal No. (Symbol) C113-20 (INJF) - C112-1 (E1)
Tool Setting 2 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the injector injection.



WAVEFORM 4


A243948
0.156,0.938 0.75,1.177 0.594,0.24 10 false (b) RLFF 0.24,2.188 0.76,2.427 0.521,0.24 10 false (a) PRD 1.5,2.792 2.354,3.031 0.854,0.24 10 false 1 msec./DIV. 2.719,0.365 3.271,0.604 0.552,0.24 10 false 2 V/DIV.

Pressure Discharge Valve Drive Signal and Pressure Discharge Confirmation Signal
Item Content
Terminal No. (Symbol) (a) C113-19 (PRD) - C112-1 (E1)
(b) C111-4 (RLFF) - C112-1 (E1)
Tool Setting 2 V/DIV., 1 msec./DIV.
Condition Engine warmed up, engine racing

HINT:

The waveform becomes shorter as the engine speed.



WAVEFORM 5


A098437
0.125,0.625 0.646,0.833 0.521,0.208 10 false (a) NE 0.229,1.479 0.646,1.677 0.417,0.198 10 false (b) G 2.771,0.302 3.417,0.5 0.646,0.198 10 false 5 V/DIV. 1.094,1.979 1.99,2.135 0.896,0.156 10 false 20 msec./DIV.

Crankshaft Position Sensor Signal and Camshaft Position Sensor Signal
Item Content
Terminal No. (Symbol) (a) C111-7 (NE+) - C111-8 (NE-)
(b) C111-13 (G+) - C111-14 (G-)
Tool Setting 5 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the engine speed.



WAVEFORM 6


A148022
2.698,0.205 3.28,0.374 0.583,0.169 10 5 V/DIV. 1.181,1.841 2.078,2.01 0.897,0.169 10 20 msec./DIV.

DC Motor Positive Terminal
Item Content
Terminal No. (Symbol) C112-15 (M+) - C112-1 (E1)
Tool Setting 5 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on turbocharger operation.



WAVEFORM 7


A148021
2.683,0.251 3.222,0.399 0.538,0.148 10 5 V/DIV. 1.224,1.873 2.153,2.02 0.929,0.148 10 50 msec./ DIV.

DC Motor Negative Terminal
Item Content
Terminal No. (Symbol) C112-14 (M-) - C112-1 (E1)
Tool Setting 5 V/DIV., 50 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the turbocharger status.



WAVEFORM 8


A091225
0.281,1.094 0.76,1.292 0.479,0.198 10 false LUSL 2.688,1.073 3.292,1.271 0.604,0.198 10 false 1 V/DIV. 1.552,1.948 2.427,2.115 0.875,0.167 10 false 2 msec./DIV.

Diesel Throttle Signal
Item Content
Terminal No. (Symbol) C111-15 (LUSL) - C112-1 (E1)
Tool Setting 1 V/DIV., 2 msec./DIV.
Condition Racing with warm engine

HINT:

The waveform varies depending on throttle valve operation.



WAVEFORM 9


A303294
2.75,0.125 3.365,0.333 0.615,0.208 10 false 5 V/DIV. 2.927,1.115 3.302,1.333 0.375,0.219 10 false GND 0.198,1.104 0.573,1.323 0.375,0.219 10 false SPD 1.521,1.885 2.521,2.125 1,0.24 10 false 10 msec./DIV.

Vehicle Speed Signal
Item Content
Terminal No. (Symbol) G148-30 (SPD) - C112-1 (E1)
Tool Setting 5 V/DIV., 10 msec./DIV.
Condition Driving at vehicle speed of 40 km/h (25 mph)

HINT:

The wavelength becomes shorter as the vehicle speed increases.



WAVEFORM 10


A303295
2.771,0.167 3.385,0.375 0.615,0.208 10 false 1 V/DIV. 2.958,1.25 3.344,1.5 0.385,0.25 10 false GND 1.573,1.781 2.625,2.031 1.052,0.25 10 false 10 msec./DIV.

CAN Communication Signal
Item Content
Terminal No. (Symbol) G148-36 (CANL) - C112-1 (E1)
Tool Setting 1 V/DIV., 10 msec./DIV.
Condition Engine stopped, ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.



WAVEFORM 11


A303296
2.802,0.156 3.396,0.385 0.594,0.229 10 false 1 V/DIV. 2.99,1.229 3.333,1.469 0.344,0.24 10 false GND 1.615,1.76 2.719,1.969 1.104,0.208 10 false 10 msec./DIV.

CAN Communication Signal
Item Content
Terminal No. (Symbol) G148-35 (CANH) - C112-1 (E1)
Tool Setting 1 V/DIV., 10 msec./DIV.
Condition Engine stopped, ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.