Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052112 CAMSHAFT OIL CONTROL VALVE A

2TR-FBE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.

Install a new O-ring to the oil control valve.


b.

Apply a light coat of engine oil to the O-ring.


c.

Install the oil control valve with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


d.

Connect the oil control valve connector.