Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › THROTTLE BODY
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052113 THROTTLE BODY G

2TR-FBE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 1.INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A075258
0.979,1.563 1.156,1.25 false 1.896,1.573 1.896,1.25 false 2.323,1.583 2.323,1.25 false 2.771,1.583 2.635,1.219 false 0.854,1.594 1.146,1.792 0.292,0.198 10 VC 2.188,1.594 2.5,1.792 0.313,0.198 10 M+ 2.677,1.594 2.99,1.792 0.313,0.198 10 M- 1.792,1.594 2.052,1.792 0.26,0.198 10 E2 0.083,0.073 0.313,0.302 0.229,0.229 10 *a
*a Component without harness connected
(Throttle Body with Motor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω
5 (VC) - 3 (E2) 20°C (68°F) 1.2 to 4.0 kΩ


If the result is not as specified, replace the throttle body with motor assembly.