1.INSTALL NO. 2 ECM BRACKET
Install the bracket with the 2 screws.
2.INSTALL NO. 1 ECM BRACKET
Install the bracket with the 2 screws.
3.INSTALL ECM
Install the ECM with the bolt and 2 nuts.
Connect the 6 connectors.
4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
5.PERFORM REGISTRATION
When replacing the ECM, input the Vehicle Identification Number (VIN) into the new ECM (See page Engine / Hybrid System>2TR-FBE ENGINE CONTROL>SFI SYSTEM>REGISTRATION).