Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › ACCELERATOR PEDAL
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052115 ACCELERATOR PEDAL A

2TR-FBE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 1.REMOVE ACCELERATOR PEDAL ROD ASSEMBLY

a.
A099092

Disconnect the accelerator pedal position sensor connector.


b.

Remove the 2 bolts and accelerator pedal rod.

NOTICE:
·

Do not drop or strike the accelerator pedal rod.

·

Do not disassemble the accelerator pedal rod.

·

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal rod assembly.

If applied, the accelerator pedal rod assembly must be replaced.