Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052118 CRANKSHAFT POSITION SENSOR G

2TR-FBE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT CRANKSHAFT POSITION SENSOR

a.
A301537
1.917,1.094 2.708,1.094 true 0.646,1.104 1.438,1.104 true 0.333,1 0.792,1.198 0.458,0.198 10 false NE- 2.771,1 3.229,1.198 0.458,0.198 10 false NE+

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Cold 1630 to 2740 Ω
Hot 2065 to 3225 Ω


NOTICE:

In the table above, the terms "Cold" and "Hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).


If the resistance is not as specified, replace the crankshaft position sensor.