Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052118 CRANKSHAFT POSITION SENSOR A

2TR-FBE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE FAN AND GENERATOR V BELT (w/ Air Conditioning System)

Hide 2.DISCONNECT COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)

a.
A255049

Remove the bolt and disconnect the suction hose from the engine.


b.
G039332

Disconnect the cooler compressor connector.


c.

Remove the 4 bolts and disconnect the compressor from the engine.


d.

Support the cooler compressor securely.


Hide 3.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)

Hide 4.REMOVE CRANKSHAFT POSITION SENSOR

a.
A301589

Disconnect the sensor connector.


b.

Disconnect the connector from the connector bracket.


c.

Detach the harness clamp.


d.

Remove the bolt and sensor.