Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052120 ENGINE COOLANT TEMPERATURE SENSOR G

2TR-FBE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT ENGINE COOLANT TEMPERATURE SENSOR

A204844
5.563,1.146 5.854,0.667 5.854,0.667 5.948,0.667 false 6,0.563 6.198,0.771 0.198,0.208 10 false *1 6.615,2.24 7.052,2.417 0.438,0.177 10 false °C(°F) 4.625,0.135 4.948,0.344 0.323,0.208 8 false 30 4.625,0.26 4.948,0.469 0.323,0.208 8 false 20 4.625,0.479 4.948,0.688 0.323,0.208 8 false 10 4.625,0.708 4.948,0.917 0.323,0.208 8 false 5 4.625,0.865 4.948,1.073 0.323,0.208 8 false 3 4.625,1.021 4.948,1.229 0.323,0.208 8 false 2 4.635,1.25 4.958,1.458 0.323,0.208 8 false 1 4.625,1.781 4.948,1.99 0.323,0.208 8 false 0.2 4.625,1.646 4.948,1.854 0.323,0.208 8 false 0.3 4.625,1.49 4.948,1.698 0.323,0.208 8 false 0.5 4.625,2 4.948,2.208 0.323,0.208 8 false 0.1 5.156,2.281 5.302,2.458 0.146,0.177 8 false 0 5.365,2.281 5.552,2.469 0.188,0.188 8 false 20 5.604,2.281 5.781,2.469 0.177,0.188 8 false 40 5.854,2.281 6.031,2.448 0.177,0.167 8 false 60 6.115,2.281 6.281,2.438 0.167,0.156 8 false 80 6.333,2.271 6.583,2.438 0.25,0.167 8 false 100 4.854,2.281 5.073,2.458 0.219,0.177 8 false -20 4.844,2.396 5.104,2.625 0.26,0.229 8 false (-4) 5.083,2.396 5.385,2.594 0.302,0.198 8 false (32) 5.323,2.396 5.573,2.604 0.25,0.208 8 false (68) 5.542,2.396 5.854,2.573 0.313,0.177 8 false (104) 5.823,2.396 6.125,2.583 0.302,0.188 8 false (140) 6.104,2.396 6.417,2.594 0.313,0.198 8 false (176) 6.385,2.396 6.698,2.583 0.313,0.188 8 false (212) 4.615,0 4.875,0.156 0.26,0.156 10 false kΩ 0.042,0 0.271,0.26 0.229,0.26 10 false *a
*1 Acceptable Range - -
*a Component without harness connected
(Engine Coolant Temperature Sensor)
- -


a.

Partially immerse the sensor in water and warm up the water.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Approx. 20°C (68°F) 2.32 to 2.59 kΩ
Approx. 80°C (176°F) 0.310 to 0.326 kΩ


If the result is not as specified, replace the engine coolant temperature sensor.

NOTICE:

When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.