Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › KNOCK SENSOR
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052121 KNOCK SENSOR G

2TR-FBE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT KNOCK SENSOR

a.

Measure the resistance between the terminals.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.