Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › HEATED OXYGEN SENSOR
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052122 HEATED OXYGEN SENSOR A

2TR-FBE ENGINE CONTROL  HEATED OXYGEN SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves when removing the heated oxygen sensor.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



PROCEDURE

Hide 1.REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

a.
A112117

Disconnect the sensor connector.


b.
A112118
2.51,1.906 2.417,1.906 2.417,1.906 1.979,1.01 true 2.563,1.802 2.875,1.958 0.313,0.156 10 false SST

Using SST, remove the sensor.

SST
09224-00010