Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › AIR FUEL RATIO SENSOR
RM1840EF _51 Engine / Hybrid System _009571 2TR-FBE ENGINE CONTROL _0052125 AIR FUEL RATIO SENSOR A

2TR-FBE ENGINE CONTROL  AIR FUEL RATIO SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves when removing the air fuel ratio sensor.

·

The exhaust pipe assembly is extremely hot immediately after the engine has stopped.

·

Confirm that the exhaust pipe assembly has cooled down before removing it.



PROCEDURE

Hide 1.REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

a.
A112091

Disconnect the sensor connector.


b.

Detach the 3 wire clamps.


c.
A112092
2.646,1.531 2.917,1.635 false 2.969,1.594 3.365,1.823 0.396,0.229 10 SST

Using SST, remove the sensor.

SST
09224-00010