Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE › 2012.04–2012.10
RM1840EF _51 Engine / Hybrid System _009572 1GR-FE ENGINE CONTROL _0052129 CAMSHAFT OIL CONTROL VALVE A

1GR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)

a.

Apply a light coat of engine oil to a new O-ring of the camshaft timing oil control valve.


b.

Install the camshaft timing oil control valve with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (surface which contacts the cylinder head).

·

Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.




c.

Connect the camshaft timing oil control valve connector.


Hide 2.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)

a.

Apply a light coat of engine oil to a new O-ring of the camshaft timing oil control valve.


b.

Install the camshaft timing oil control valve with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve (surface which contacts the cylinder head).

·

Be careful that the O-ring is not cracked when installing the camshaft timing oil control valve.




c.

Connect the camshaft timing oil control valve connector.


Hide 3.INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY