1.CHECK CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
Connect the intelligent tester to the DLC3.
Start the engine and turn the intelligent tester on.
Warm up the engine.
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1) or Control the VVT System (Bank 2).
| Tester Display |
|---|
| Control the VVTL System (Bank1) |
| Tester Display |
|---|
| Control the VVTL System (Bank2) |
Check the engine speed while operating the oil control valve (OCV) using the tester.
| Tester Operation | Specified Condition |
|---|---|
| VVT system is OFF (OCV is OFF) | Normal engine speed |
| VVT system is ON (OCV is ON) | Rough idle or engine stalled |
If the result is not as specified, check the camshaft timing oil control valve assembly, wiring and camshaft timing gear.