Home › Engine / Hybrid System › 1KD-FTV ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM1840EF _51 Engine / Hybrid System _009573 1KD-FTV ENGINE MECHANICAL _0052149 FRONT CRANKSHAFT OIL SEAL A

1KD-FTV ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  REMOVAL  


PROCEDURE

Hide 1.REMOVE RADIATOR ASSEMBLY

Hide 2.REMOVE CRANKSHAFT PULLEY

a.
A251844
1.49,1.823 1.406,2 1.406,2 1.323,2 false 1.115,0.865 0.844,0.625 0.844,0.625 0.729,0.625 true 1.052,1.906 1.365,2.073 0.313,0.167 10 false SST 0.365,0.521 0.677,0.688 0.313,0.167 10 false SST

Using SST, hold the crankshaft pulley and loosen the pulley bolt.

SST
09213-58014  
09330-00021  


b.
A302001
0.969,1.635 0.969,1.104 0.969,1.104 1.115,0.906 true 0.844,1.646 1.188,1.844 0.344,0.198 10 false SST

Using SST, remove the pulley bolt and crankshaft pulley.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05021)


Hide 3.REMOVE FRONT CRANKSHAFT OIL SEAL

a.
A251846
1.344,1.094 0.917,0.823 0.917,0.823 0.792,0.823 true 0.427,0.74 0.729,0.906 0.302,0.167 10 false SST

Using SST, remove the front crankshaft oil seal.

SST
09308-10010  
09950-40011  (09957-04010)
09950-60010  (09951-00350)

HINT:

After removal, check the crankshaft for damage. If damaged, smooth the surface with #400 sandpaper.