Home › Engine / Hybrid System › 2KD-FTV ENGINE MECHANICAL › CYLINDER HEAD(w/ DPF) › from 2012.04
RM1840EF _51 Engine / Hybrid System _009574 2KD-FTV ENGINE MECHANICAL _0052181 CYLINDER HEAD(w/ DPF) A

2KD-FTV ENGINE MECHANICAL  CYLINDER HEAD(w/ DPF)  REPAIR  


PROCEDURE

Hide 1.REPAIR INTAKE VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the intake valve seat smooth.



a.
A303237
2.396,0.656 2.635,0.833 0.24,0.177 10 false 45° 2.927,0.573 3.167,0.75 0.24,0.177 10 false 25° 2.823,1.698 3.063,1.875 0.24,0.177 10 false *a
*a 1.2 to 1.6 mm (0.0472 to 0.0630 in.)


If the seating is too high on the valve face, use 25 and 45° cutters to correct the seat.


b.
A303238
2.156,0.271 2.458,0.458 0.302,0.188 10 false 70° 2.896,0.385 3.198,0.573 0.302,0.188 10 false 45° 2.854,1.646 3.156,1.833 0.302,0.188 10 false *a
*a 1.2 to 1.6 mm (0.0472 to 0.0630 in.)


If the seating is too low on the valve face, use 70 and 45° cutters to correct the seat.


c.
A059928

Hand-lap the valve and valve seat with an abrasive compound.


d.

Clean the valve and valve seat.


Hide 2.REPAIR EXHAUST VALVE SEAT

NOTICE:
·

Repair the seat while checking the seating position.

·

Keep the lip free of foreign matter.

·

Take off the cutter gradually to make the exhaust valve seat smooth.



a.
A303237
2.417,0.646 2.677,0.854 0.26,0.208 10 false 45° 2.938,0.573 3.198,0.781 0.26,0.208 10 false 25° 2.792,1.729 3.052,1.938 0.26,0.208 10 false *a
*a 1.6 to 2.0 mm (0.0630 to 0.0787 in.)


If the seating is too high on the valve face, use 25 and 45° cutters to correct the seat.


b.
A303238
2.146,0.323 2.417,0.531 0.271,0.208 10 false 75° 2.885,0.375 3.156,0.583 0.271,0.208 10 false 45° 2.885,1.698 3.156,1.906 0.271,0.208 10 false *a
*a 1.6 to 2.0 mm (0.0630 to 0.0787 in.)


If the seating is too low on the valve face, use 75 and 45° cutters to correct the seat.


c.
A058111

Hand-lap the valve and valve seat with an abrasive compound.


d.

Clean the valve and valve seat.