Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › DRIVE BELT › from 2012.04
RM1840EF _51 Engine / Hybrid System _009577 1GR-FE ENGINE MECHANICAL _0052204 DRIVE BELT A

1GR-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 1.REMOVE FAN AND GENERATOR V BELT

a.
A301898

While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar with a diameter of 6.0 mm (0.236 in.) into the service hole to fix the belt tensioner in place.

HINT:

The pulley bolt for the belt tensioner has a left-hand thread.



b.

Remove the fan and generator V belt.