Home › Engine / Hybrid System › 2KD-FTV FUEL › FUEL INJECTOR(w/o DPF)
RM1840EF _51 Engine / Hybrid System _009578 2KD-FTV FUEL _0052215 FUEL INJECTOR(w/o DPF) G

2KD-FTV FUEL  FUEL INJECTOR(w/o DPF)  INSPECTION  


PROCEDURE

Hide 1.INSPECT INJECTOR ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.42 to 0.52 Ω


If the result is not as specified, replace the injector assembly.