Home › Engine / Hybrid System › 2TR-FE FUEL › FUEL SENDER GAUGE ASSEMBLY
RM1840EF _51 Engine / Hybrid System _009580 2TR-FE FUEL _0052248 FUEL SENDER GAUGE ASSEMBLY G

2TR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A303125
0.521,2.49 1.26,2.49 false 0.573,4.271 1.594,4.271 false 0.104,0.094 0.417,0.25 0.313,0.156 10 false *a 0.365,2.417 0.521,2.615 0.156,0.198 10 false F 0.385,4.177 0.542,4.375 0.156,0.198 10 false E
*a Front view of wire harness connector
(to Fuel Sender Gauge Assembly)


Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 3.0 to 5.0 Ω
Float position is E (lower) 109 to 111 Ω


If the result is not as specified, replace the fuel sender gauge assembly.