Home › Engine / Hybrid System › 2TR-FBE FUEL › FUEL PUMP(for Fuel Main Tank)
RM1840EF _51 Engine / Hybrid System _009581 2TR-FBE FUEL _0052257 FUEL PUMP(for Fuel Main Tank) G

2TR-FBE FUEL  FUEL PUMP(for Fuel Main Tank)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT FUEL PUMP

a.

Check fuel pump operation.

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to ON.

NOTICE:

Do not start the engine.



iii.

Push the intelligent tester main switch on.


iv.

Select the Active Test and enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.

Powertrain > Engine and ECT > Active Test
Tester Display
Control the Fuel Pump / Speed
50004 234 5