Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PUMP › from 2012.04
RM1840EF _51 Engine / Hybrid System _009582 1GR-FE FUEL _0052268 FUEL PUMP A

1GR-FE FUEL  FUEL PUMP  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL FUEL PUMP

a.

Install the fuel pump harness.


b.

Connect the fuel pump connector.


c.
A191423
2.688,0.313 2.854,0.313 2.854,0.313 3.052,0.833 false 2.385,1.438 2.385,2.052 true 2.479,0.229 2.667,0.417 0.188,0.188 10 false *1 2.323,2.083 2.521,2.26 0.198,0.177 10 false *2 2.24,2.583 2.427,2.76 0.188,0.177 10 false *3
*1 Supporter
*2 New O-Ring
*3 Fuel Pump


Apply a light coat of gasoline to a new O-ring, and install the O-ring to the supporter of the fuel suction plate.


d.

Attach the 3 claws to the claw holes and install the fuel pump and suction filter assembly.


Hide 2.INSTALL NO. 1 FUEL SUB-TANK

a.

Attach the 2 claws to the claw holes and install the fuel sub-tank.


b.

Attach the 3 claws to the claw holes.


c.

Connect the 2 fuel tubes and fuel pump harness.


d.

Attach the claw on the end of the tube to the claw hole. Connect the tube to the 2 clamps on the fuel sub-tank.


e.

Connect the fuel pump connector.