Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PUMP RESISTOR › from 2012.04
RM1840EF _51 Engine / Hybrid System _009582 1GR-FE FUEL _0052269 FUEL PUMP RESISTOR G

1GR-FE FUEL  FUEL PUMP RESISTOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT FUEL PUMP RESISTOR

a.

Inspect the fuel pump resistor resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.70 to 0.76 Ω


If the result is not as specified, replace the fuel pump resistor.