Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL SENDER GAUGE ASSEMBLY › from 2012.04
RM1840EF _51 Engine / Hybrid System _009582 1GR-FE FUEL _0052271 FUEL SENDER GAUGE ASSEMBLY G

1GR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A303138
0.427,1.906 1.073,1.906 true 0.479,4.156 1.01,4.156 true 0.104,0.115 0.417,0.271 0.313,0.156 10 false *a 0.281,1.813 0.594,1.969 0.313,0.156 10 false F 0.333,4.073 0.646,4.229 0.313,0.156 10 false E
*a Front view of wire harness connector
(to Fuel Sender Gauge Assembly)


Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float position is F (upper) 3 to 5 Ω
Float position is E (lower) 109 to 111 Ω


If the result is not as specified, replace the fuel sender gauge assembly.