Home › Engine / Hybrid System › 2KD-FTV EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR › from 2012.04
RM1840EF _51 Engine / Hybrid System _009583 2KD-FTV EMISSION CONTROL _0052280 EXHAUST GAS TEMPERATURE SENSOR G

2KD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 50°C (122°F) 82 to 137 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the exhaust gas temperature sensor.


Hide 2.INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 50°C (122°F) 82 to 137 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the No. 2 exhaust gas temperature sensor.


Hide 3.INSPECT NO. 3 EXHAUST GAS TEMPERATURE SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 50°C (122°F) 82 to 137 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the No. 3 exhaust gas temperature sensor.