1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
2.REMOVE NO. 1 GAS FILTER WITH GAS FILTER BRACKET (w/ EGR Cooler)
Disconnect the 2 vacuum hoses.
Remove the bolt and No. 1 gas filter with gas filter bracket.
3.REMOVE ELECTRIC VACUUM REGULATING VALVE ASSEMBLY (for EGR)
w/ EGR Cooler:
Disconnect the connector.
Disconnect the 4 vacuum hoses.
Remove the 2 bolts and electric vacuum regulating valve with bracket.
Do not remove the electric vacuum regulating valve from the bracket.
w/o EGR Cooler:
Disconnect the 2 connectors.
Disconnect the 3 vacuum hoses.
Remove the 2 bolts and electric vacuum regulating valve together with the bracket.
Do not remove the electric vacuum regulating valve from the bracket.
Remove the bolt and vacuum switching valve.