Home › Engine / Hybrid System › 1KD-FTV EMISSION CONTROL › DIFFERENTIAL PRESSURE SENSOR › from 2012.04
RM1840EF _51 Engine / Hybrid System _009584 1KD-FTV EMISSION CONTROL _0052297 DIFFERENTIAL PRESSURE SENSOR A

1KD-FTV EMISSION CONTROL  DIFFERENTIAL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 2.REMOVE NO. 1 FRONT FLOOR HEAT INSULATOR

a.
A253529

Remove the 3 nuts and No. 1 front floor heat insulator.


Hide 3.REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY

A271882

a.

Disconnect the connector.


b.
A244979

Remove the nut and differential pressure sensor from the sensor bracket.


c.
A253530

Remove the No. 6 exhaust pipe air hose and No. 7 exhaust pipe air hose from the differential pressure sensor.