Home › Engine / Hybrid System › 2TR-FE EMISSION CONTROL › AIR PUMP(w/ Secondary Air Injection System)
RM1840EF _51 Engine / Hybrid System _009585 2TR-FE EMISSION CONTROL _0052300 AIR PUMP(w/ Secondary Air Injection System) A

2TR-FE EMISSION CONTROL  AIR PUMP(w/ Secondary Air Injection System)  REMOVAL  


PROCEDURE

Hide 1.REMOVE AIR CLEANER ASSEMBLY

a.
A301895

Disconnect the mass air flow meter connector.


b.

Detach the wire harness clamp.


c.

Loosen the hose clamp.


d.

Remove the 2 bolts and air cleaner.


Hide 2.REMOVE AIR PUMP INLET

a.
A253438
3.146,1.208 3.052,1.208 3.052,1.208 2.844,0.635 true 1.469,0.542 1.469,1.323 true 2.792,1.583 2.698,1.583 2.698,1.583 2.573,1.323 true 1.396,1.385 1.563,1.542 0.167,0.156 10 true *1 3.208,1.104 3.375,1.26 0.167,0.156 10 true *2 2.844,1.49 3.073,1.667 0.229,0.177 10 true *3
*1 No. 4 Air Injection System Hose
*2 Air Pump Inlet
*3 No. 1 Air Injection System Hose


Remove the bolt and air pump inlet.


Hide 3.REMOVE NO. 1 AIR INJECTION SYSTEM HOSE

a.

Remove the No. 1 air injection system hose from the air pump inlet pipe.


Hide 4.REMOVE NO. 4 AIR INJECTION SYSTEM HOSE

a.

Disconnect the No. 4 air injection system hose from the hose clamp.


b.

Loosen the 2 clamps and remove the No. 4 air injection system hose.


Hide 5.REMOVE FRONT FENDER APRON SEAL UPPER

a.

Remove the 5 clips and front fender apron seal upper.


Hide 6.REMOVE AIR PUMP ASSEMBLY WITH BRACKET

a.
A301897

Disconnect the air pump connector.


b.

Using a clip remover, detach the 2 claws from the body panel and air pump inlet pipe.


c.
A099524

Disconnect the No. 3 air injection system hose from the air pump inlet pipe.


d.

Disconnect the No. 2 air injection system hose from the air pump inlet pipe.


e.

Remove the 3 bolts and air pump assembly with bracket.


Hide 7.REMOVE AIR PUMP INLET PIPE

a.

Remove the bolt and air pump inlet pipe.


Hide 8.REMOVE AIR PUMP COVER

a.
A110282

Using a clip remover, detach the 3 clips and remove the air pump cover.


Hide 9.REMOVE NO. 2 AIR INJECTION SYSTEM HOSE

a.
A253439
2.74,0.635 2.396,0.635 false 2.042,1.74 2.542,1.74 false 1.167,1.76 1.448,1.76 false 2.771,0.563 2.938,0.729 0.167,0.167 10 false *1 2.594,1.656 2.802,1.823 0.208,0.167 10 false *3 0.969,1.677 1.177,1.854 0.208,0.177 10 false *2
*1 No. 3 Air Injection System Hose
*2 No. 2 Air Injection System Hose
*3 Clamp


Detach the clamp from the No. 2 air injection system hose and wire harness.


b.

Detach the clamp from the bracket.


c.

Loosen the clamp and remove the No. 2 air injection system hose from the air pump assembly.


Hide 10.REMOVE NO. 3 AIR INJECTION SYSTEM HOSE

a.

Remove the No. 3 air injection system hose from the air pump assembly.


Hide 11.REMOVE AIR PUMP ASSEMBLY

a.
A253440
1.031,0.708 1.125,0.813 0.094,0.104 6 false .
V100135

Air Pump Insulator


Detach the 3 fittings of the air pump insulators and remove the air pump from the bracket.