Home › Engine / Hybrid System › 1KD-FTV INTAKE / EXHAUST › EXHAUST MANIFOLD W/ TURBOCHARGER(w/o DPF)
RM1840EF _51 Engine / Hybrid System _009588 1KD-FTV INTAKE / EXHAUST _0052321 EXHAUST MANIFOLD W/ TURBOCHARGER(w/o DPF) G

1KD-FTV INTAKE / EXHAUST  EXHAUST MANIFOLD W/ TURBOCHARGER(w/o DPF)  INSPECTION  


PROCEDURE

Hide 1.VISUALLY CHECK TURBOCHARGER SUB-ASSEMBLY

a.
A220776
1.542,3.427 0.688,3.427 true 0.5,3.333 0.688,3.479 0.188,0.146 10 false *1
*1 Turbine Wheel


Check for deformation and cracks in the turbine wheel on the exhaust side.

If the turbine wheel is cracked or deformed, replace the turbocharger sub-assembly.


Hide 2.INSPECT AXIAL PLAY OF TURBINE SHAFT

a.
A254005

Using a dial indicator, insert the needle of the dial indicator into the exhaust side of the turbine shaft.

NOTICE:

Turbocharger sub-assembly and dial indicators are surely fixed when performing measurement.



b.

Move the turbine shaft in an axial direction and measure the axial play of the turbine shaft.

Maximum axial play:

0.11 mm (0.00433 in.)


If the axial play is more than the maximum, replace the turbocharger sub-assembly.


Hide 3.INSPECT RADIAL PLAY OF TURBINE SHAFT

a.
A211841

Using a dial indicator, insert the needle of the dial indicator into the oil outlet hole, and set it in the center of the turbine shaft.


b.

Move the turbine shaft in a radial direction and measure the radial play of the turbine shaft.

Maximum radial play:

0.112 mm (0.00440 in.)


If the radial play is more than the maximum, replace the turbocharger sub-assembly.


Hide 4.CHECK TURBINE SHAFT ROTATION

a.
A229649

Rotate the turbine wheel on the exhaust side with your finger and check that it rotates smoothly.

HINT:

Even if it takes effort a little to rotate the turbine wheel, this is not a problem.


If the turbine wheel does not rotate smoothly, replace the turbocharger sub-assembly.