Home › Engine / Hybrid System › 1KD-FTV INTAKE / EXHAUST › INTERCOOLER(w/ Glow Plug Controller) › from 2012.04
RM1840EF _51 Engine / Hybrid System _009588 1KD-FTV INTAKE / EXHAUST _0052333 INTERCOOLER(w/ Glow Plug Controller) A

1KD-FTV INTAKE / EXHAUST  INTERCOOLER(w/ Glow Plug Controller)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL INTERCOOLER ASSEMBLY

a.

Install a new gasket and the intake air connector with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Install a new No. 2 air hose.


c.

Install the intercooler with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


d.

Tighten the 2 hose clamps of the No. 2 air hose.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


e.

Tighten the 2 hose clamps of the No. 1 air hose.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


Hide 3.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

a.

Install the No. 1 engine cover with the 3 bolts and 2 cap nuts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)