Home › Engine / Hybrid System › 2KD-FTV INTAKE / EXHAUST › EXHAUST PIPE(w/o DPF)
RM1840EF _51 Engine / Hybrid System _009590 2KD-FTV INTAKE / EXHAUST _0052338 EXHAUST PIPE(w/o DPF) A

2KD-FTV INTAKE / EXHAUST  EXHAUST PIPE(w/o DPF)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves when removing the exhaust pipe.


·

The exhaust pipe is extremely hot immediately after the engine has stopped.


·

Confirm that the exhaust pipe has cooled down before removing it.



PROCEDURE

Hide 1.REMOVE TAILPIPE ASSEMBLY

a.

Remove the 2 bolts and 2 nuts.


b.

Disconnect the tailpipe from the center exhaust pipe and remove the gasket.


c.

Remove the tailpipe from the exhaust pipe support.


Hide 2.REMOVE CENTER EXHAUST PIPE ASSEMBLY

a.

Remove the 2 bolts and 2 nuts.


b.

Disconnect the center exhaust pipe from the front exhaust pipe and remove the gasket.


c.

Remove the center exhaust pipe from the 3 exhaust pipe supports.


Hide 3.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.

Remove the 2 bolts and 2 compression springs.


b.

Disconnect the front exhaust pipe from the turbine outlet elbow and remove the gasket.


c.

Remove the front exhaust pipe from the exhaust pipe support.