Home › Engine / Hybrid System › 2KD-FTV INTAKE / EXHAUST › EXHAUST MANIFOLD W/ TURBOCHARGER(for DPF) › from 2012.04
RM1840EF _51 Engine / Hybrid System _009590 2KD-FTV INTAKE / EXHAUST _0052347 EXHAUST MANIFOLD W/ TURBOCHARGER(for DPF) G

2KD-FTV INTAKE / EXHAUST  EXHAUST MANIFOLD W/ TURBOCHARGER(for DPF)  INSPECTION  


PROCEDURE

Hide 1.VISUALLY CHECK TURBOCHARGER SUB-ASSEMBLY

A220776C02
1.542,3.427 0.688,3.427 true 0.5,3.333 0.688,3.479 0.188,0.146 10 false *1
*1 Turbine Wheel


a.

Check for deformation and cracks in the turbine wheel on the exhaust side.

If the turbine wheel is cracked or deformed, replace the turbocharger sub-assembly.


Hide 2.INSPECT AXIAL PLAY OF TURBINE SHAFT

a.

Using a dial indicator, insert the needle of the dial indicator into the exhaust side of the turbine shaft.


b.
A254005

Move the turbine shaft in the axial direction and measure the axial play of the turbine shaft.

Maximum axial play:

0.11 mm (0.0043 in.)


If the axial play is more than the maximum, replace the turbocharger sub-assembly.


Hide 3.CHECK TURBINE SHAFT ROTATION

a.
A220777

Rotate the turbine wheel on the exhaust side with your finger and check that it rotates smoothly.

HINT:

Even if it takes effort a little to rotate the turbine wheel, this is not a problem.


If the turbine wheel does not rotate smoothly, replace the turbocharger sub-assembly.